EVO 15 SOLAR PIR UTILITY LIGHT
The EVO 15 Solar PIR Utility Light is a real game-changer for the budget end of the solar security light and solar shed light market. There are several well known solar security and solar shed lights on the market that offer considerably less for up to twice the price.
KEY FEATURES:
- 15 Super Bright LED’s-White
- Can be used outside as a solar security light or inside as a solar shed light
- Will light for 16 hours once fully charged
- Light will remain on for 25 seconds once motion is detected
- 0.6W Polycrystalline solar panel
- Solar panel output: 6V/100mA 0.6W
- Rechargeable batteries: 3x AAA Ni-MH 750MAH included
- PIR detection range 2m to 4m
- 4.8m of cable between solar panel and light
- No need for an electrician
- Batteries, screws, plugs, instructions and mounting bracket included
DIMENSIONS:
Light body:
W: 13cm, D: 9cm, H: 13cm
Weight: 0.48 KG
HOW DOES IT WORK?
The Solar PIR Utility Light has a powerful 0.6W solar panel that charges the high capacity batteries during the day.
At night the Solar PIR Utility Light lights up as soon as it detects motion and turns itself off 25 seconds after motion stops.
USING IT AS A SOLAR SECURITY LIGHT:
Simply position your Solar PIR Utility Light outside and position the solar panel facing south. After dark the Solar PIR Utility Light will light up as soon as it detects motion.
USING IT AS A SOLAR SHED LIGHT:
Install your light inside your shed and position the solar panel outside (usually on top of your shed). When you enter your shed the PIR Utility Light will light up automatically and turn off again 25 seconds after you leave.
HOW DO I INSTALL IT?
The Solar PIR Utility Light is very easy to install in comparison with mains powered security lights.
The box contains the main light unit, a solar panel connected to 4.8 metres of cable, 6 screws with 6 raw plugs and a set of instructions.
CUSTOMER COMMENTS:
Just what I needed in my garage with no electric points. Had tried other products before but this one really works, seems waterproof, gives good light and stays on while you are in sight, instead of switching off like others.
FAQ:
Q is it possible to override the PIR sensor for continuous light?
A No, there is no way of overriding the PIR sensor.
Q Can this light be switched off but still connected to the panel?
A Yes it can be switched off using the on/off button
Q Is it possible to adjust the duration of the light?
A No it cannot be adjusted. If this is what you need you may want
to consider buying the EVO56
Q Is the light IP rated?
A The light is IP44 rated
Q How wide is the angle of the PIR detector?
A The angle is 120 degrees wide
